Login

New: Dirtstyletv

Today, DirtStyle TV is one of the go-to destinations for off-road enthusiasts, with a loyal following and a reputation for delivering the best in dirt sports content. And it all started with a team of passionate individuals who dared to dream big.

As the days turned into weeks, the team worked tirelessly to bring their vision to life. They scouted locations, booked talent, and started filming. The result was a series that was raw, edgy, and unapologetically off-road. dirtstyletv new

The first episode of "DirtStyleTV New" dropped on YouTube, and the response was overwhelming. Fans loved the fresh perspective, the high-flying action, and the behind-the-scenes look at the off-road world. Today, DirtStyle TV is one of the go-to

The team leader, a grizzled off-road veteran named Jake, stood up and addressed the group. "We're not just going to create a channel, guys. We're going to create a movement. We're going to take the best riders, drivers, and athletes in the sport and put them on a platform that will make them legends." They scouted locations, booked talent, and started filming

As they sat in their makeshift office, surrounded by dusty helmets and muddy boots, they talked about their vision for the channel. They wanted to bring a fresh perspective to the off-road community, one that was raw, uncut, and authentic.

It was a sunny day in California when the team behind DirtStyle TV gathered to discuss their new project. The group, consisting of passionate off-road enthusiasts, had been working tirelessly to create a platform that would showcase the best of dirt sports. From motocross to rock crawling, they wanted to cover it all.

The team cheered, and the camera crew started to brainstorm ideas for their first series. They would call it "DirtStyleTV New," a show that would feature the latest and greatest in off-road sports.

Testimonials
TAKE THE TOUR


SPSS Statistics

SPSS Statistics procedure to create an "ID" variable

In this section, we explain how to create an ID variable, ID, using the Compute Variable... procedure in SPSS Statistics. The following procedure will only work when you have set up your data in wide format where you have one case per row (i.e., your Data View has the same setup as our example, as explained in the note above):

  1. Click Transform > Compute Variable... on the main menu, as shown below:

    Note: Depending on your version of SPSS Statistics, you may not have the same options under the Transform menu as shown below, but all versions of SPSS Statistics include the same compute variable menu option that you will use to create an ID variable.

    computer menu to create a new ID variable

    Published with written permission from SPSS Statistics, IBM Corporation.


    You will be presented with the Compute Variable dialogue box, as shown below:
    'recode into different variables' dialogue box displayed

    Published with written permission from SPSS Statistics, IBM Corporation.

  2. Enter the name of the ID variable you want to create into the Target Variable: box. In our example, we have called this new variable, "ID", as shown below:
    ID variable entered into Target Variable box in top left

    Published with written permission from SPSS Statistics, IBM Corporation.

  3. Click on the change button and you will be presented with the Compute Variable: Type and Label dialogue box, as shown below:
    empty 'compute variable: type and label' dialogue box

    Published with written permission from SPSS Statistics, IBM Corporation.

  4. Enter a more descriptive label for your ID variable into the Label: box in the –Label– area (e.g., "Participant ID"), as shown below:
    participant ID entered in 'compute variable: type and label' dialogue box

    Published with written permission from SPSS Statistics, IBM Corporation.

    Note: You do not have to enter a label for your new ID variable, but we prefer to make sure we know what a variable is measuring (e.g., this is especially useful if working with larger data sets with lots of variables). Therefore, we entered the label, "Participant ID", into the Label: box. This will be the label entered in the label column in the Variable View of SPSS Statistics when you complete at the steps below.

  5. Click on the continue button. You will be returned to the Compute Variable dialogue box, as shown below:
    ID variable entered

    Published with written permission from SPSS Statistics, IBM Corporation.

  6. Enter the numeric expression, $CASENUM, into the Numeric Expression: box, as shown below:
    second category - '2' and '4' - entered

    Published with written permission from SPSS Statistics, IBM Corporation.

    7. Explanation: The numeric expression, $CASENUM, instructs SPSS Statistics to add a sequential number to each row of the Data View. Therefore, the sequential numbers start at "1" in row 1, then "2" in row 2, "3" in row 3, and so forth. The sequential numbers are added to each row of data in the Data View. Therefore, since we have 100 participants in our example, the sequential numbers go from "1" in row 1 through to "100" in row 100.

    Note: Instead of typing in $CASENUM, you can click on "All" in the Function group: box, followed by "$Casenum" from the options that then appear in the Functions and Special Variables: box. Finally, click on the up arrow button. The numeric expression, $CASENUM, will appear in the Numeric Expression: box.

  7. Click on the ok button and the new ID variable, ID, will have been added to our data set, as highlighted in the Data View window below:

data view with new 'nominal' ID variable highlighted

Published with written permission from SPSS Statistics, IBM Corporation.


If you look under the ID column in the Data View above, you can see that a sequential number has been added to each row, starting with "1" in row 1, then "2" in row 2, "3" in row 3, and so forth. Since we have 100 participants in our example, the sequential numbers go from "1" in row 1 through to "100" in row 100.

Therefore, participant 1 along row 1 had a VO2max of 55.79 ml/min/kg (i.e., in the cell under the vo2max column), was 27 years old (i.e., in the cell under the age column), weighed 70.47 kg (i.e., in the cell under the weight column), had an average heart rate of 150 (i.e., in the cell under the heart rate column) and was male (i.e., in the cell under the gender column).

The new variable, ID, will also now appear in the Variable View of SPSS Statistics, as highlighted below:

variable view for new 'nominal' ID variable highlighted

Published with written permission from SPSS Statistics, IBM Corporation.


The name of the new variable, "ID" (i.e., under the name column), reflects the name you entered into the Target Variable: box of the Compute Variable dialogue box in Step 2 above. Similarly, the label of the new variable, "Participant ID" (i.e., under the label column), reflects the label you entered into the Label: box in the –Label– area in Step 4 above. You may also notice that we have made changes to the decimals, measure and role columns for our new variable, "ID". When the new variable is created, by default in SPSS Statistics the role column will be set to "2" (i.e., two decimal places), the measure will show scale and the role column will show input. We changed the number of decimal places in the decimals column from "2" to "0" because when you are creating an ID variable, this does not require any decimal places. Next, we changed the variable type from the default entered by SPSS Statistics, scale, to nominal, because our new ID variable is a nominal variable (i.e., a nominal variable) and not a continuous variable (i.e., not a scale variable). Finally, we changed the cell under the role from the default, input, to none, for the same reasons mentioned in the note above.

Referencing

Laerd Statistics (2025). Creating an "ID" variable in SPSS Statistics. Statistical tutorials and software guides. Retrieved from https://statistics.laerd.com/


Join the 10,000s of students, academics and professionals who rely on Laerd Statistics.TAKE THE TOUR
1