16c95x Serial Port Driver

// Enable interrupts outb(io_base + IER, 0x01); // IER = 0x01 (RDA interrupt enable)

// Define the 16C95X serial port registers #define RBR 0x00 #define THR 0x00 #define IER 0x01 #define IIR 0x02

Here's a simple example of a 16C95X serial port driver in C, which demonstrates how to initialize the serial port and transmit data: 16c95x serial port driver

#include <linux/module.h> #include <linux/io.h>

The 16C95X is a family of serial port controllers developed by National Semiconductor (now part of Texas Instruments). These controllers are commonly used in embedded systems, industrial automation, and other applications that require serial communication. // Enable interrupts outb(io_base + IER, 0x01); //

return 0; }

The 16C95X serial port driver is typically implemented as a kernel module or a device driver in the operating system. The driver interacts with the 16C95X serial port controller through a set of registers, which are mapped to specific addresses in the system's memory. The driver interacts with the 16C95X serial port

module_init(serial_init); Note that this example is highly simplified and not meant for production use.